[ANN] One-Click Ruby Installer 1.8.2-14 RC8 for Windows

ruby-talk
1

This release candidate of the One-Click Installer for Windows
adds the FreeRIDE Ruby IDE (which has full source code
navigation and a graphical debugger), and updates ruby-odbc
to version 0.994.

As soon as Matz releases Ruby 1.8.2 final, then we will release
the final 1.8.2 version of the One-Click Installer

Curt

You can download this release candidate from:
http://rubyforge.org/frs/?group_id=167

===== Original Text from RC7 Release =====

Ok, ok... I know I said no more releases until
1.8.2 final, but Matz just released 1.8.2
preview2 so I thought I would get an installer
out that includes this before I go on my vacation
tomorrow. There were no other changes since rc6 Enjoy!

===== Original Text from RC6 Release =====

This release candidate of the Ruby Installer for Windows
was built from the recently released Ruby 1.8.2 preview1.
Unless serious problems are reported, this will probably
be the last release candidate until matz releases 1.8.2
final.

There were four changes since RC5:
- tab-completion in irb now works
   (thanks to _why for his help).
- The OpenGL support that was
   inadvertently left out of RC5
   is back in.
- Start menu shortcuts have been
   added to online documentation on
   ruby-doc.org.
- The "reboot" dialog message at the
   end of the installation has been
   removed to enable unattended
   installations using the command
   line arguments:
      /S /D=<install dir>

You can download this release candidate from:

  http://rubyforge.org/frs/?group_id=167

You can check for reported problems (or report
new problems) at:

  http://rubyforge.org/tracker/?group_id=167

What is the Ruby Installer for Windows?

···

---------------------------------------

The Ruby Installer for Windows is a "one-click",
self-contained Windows installer that contains
the Ruby language itself, dozens of popular
extensions and packages, a syntax-highlighting
editor and execution environment, and a Windows
help file that contains the full text of the
book, "Programming Ruby: The Pragmatic Programmer's
Guide".

Change Log for 1.8.2-14_RC6
---------------------------
- This is a build of Ruby 1.8.2 preview1.
- Corrected missing OpenGL support.
- Added Start Menu shortcuts to documentation
  on ruby-doc.org.
- Eliminated the installer dialog message that
  warned you might need to reboot your system.
  This allows for unattended installs using the
  command-line arguments:
      /S /D=<install dir>
- Changed the layout of the Windows registry
  entries.
- Fixed a typo in a windows registry entry
  (bug 643).
- Upgraded Expat to version 1.95.7
- Upgraded Ruby-odbc to version 0.993
- Upgraded DBI to 0.23
- Upgraded FXRuby to version 1.0.29

_______________________________________________
Rubyinstaller-announce mailing list
Rubyinstaller-announce@rubyforge.org
http://rubyforge.org/mailman/listinfo/rubyinstaller-announce

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.726 / Virus Database: 481 - Release Date: 7/22/2004

2

Hi!

First of all, thanks for the effort, it's really appreciated! :slight_smile:

Still, I'd like to see some features and have some issues:

Being the lazy guy that I am, I like to create new files by using the 'new' command in explorers context menu. So, in order to create a new ruby programm, I right-click in the folder I'd like to have the new file in, choose new, choose new ruby programm, and explorer generates an empty file 'new ruby program.rb' (or something alike). Any chance to have an option for this in the installer?
(you'd need to create a new key 'ShellNew' under 'HKEY_CLASSES_ROOT\.rb' and add an emtpy REG_SZ (String Value) named NullFile. Of course I could always do it by hand, but as I said, I'm lazy :slight_smile: )

http://www.mvps.org/sramesh2k/shellnewadd.htm has a pretty good explanation how to do it by hand

And I'm having troubles selecting the installation directory. The 'browse'-option allows me to create new folders, but does not allow to select this newly created folder (the 'Ok'-button stays disabled ). I have to type the folder into the field to have the installer accept it. (Yikes, typing!)

I'm using Win 2k :slight_smile:

Sorry if this did come up before, I wasn't able to find anything on the list or in the installer-wiki.

Henrik

3

Curt Hibbs wrote:

This release candidate of the One-Click Installer for Windows adds the FreeRIDE Ruby IDE (which has full source code navigation and a graphical debugger), and updates ruby-odbc to version 0.994.

As soon as Matz releases Ruby 1.8.2 final, then we will release the final 1.8.2 version of the One-Click Installer

Curt

You can download this release candidate from:
http://rubyforge.org/frs/?group_id=167

When I downloaded the .exe using Firebird 0.6, the browser seems to think the file type is.gz, though the file name ends in .exe. (Then Firebird takes it upon itself to append this extension to the file name. Dopey.)

This could be a Mozilla bug, but might the download page be sending a response header stating that the file's MIME type is gzip?

(I believe that when you add a file to the download section on RubyForge, you need to indicate the file type, so perhaps it is set to gzip.)

Thanks,

James

4

Curt Hibbs wrote:

This release candidate of the One-Click Installer for Windows adds the FreeRIDE Ruby IDE (which has full source code navigation and a graphical debugger), and updates ruby-odbc to version 0.994.

I just installed RC8, selected the installation of FreeRIDE, but declined the installation of Scite. When I try to run FreeRIDE, I get an error message that iconv.dll cannot be found.

After I acknowledge the message, FreeRIDE loads anyway. I don't know, though, that it does all it is suppose to.

Thanks,

James

5

In article <EAENKKNOJPMNCDMLDOMLIEHDFIAA.curt@hibbs.com>,

···

Curt Hibbs <curt@hibbs.com> wrote:

This release candidate of the One-Click Installer for Windows
adds the FreeRIDE Ruby IDE (which has full source code
navigation and a graphical debugger), and updates ruby-odbc
to version 0.994.

As soon as Matz releases Ruby 1.8.2 final, then we will release
the final 1.8.2 version of the One-Click Installer

Curt

You can download this release candidate from:
http://rubyforge.org/frs/?group_id=167

I just installed the RC8 release. Looks good, except that the tk examples
in the samples dir don't seem to work. require 'tk' seems to fail (but I
can see the tcltklib.so). Fox examples worked, though.

Phil

6

Curt Hibbs wrote:

You can download this release candidate from:
http://rubyforge.org/frs/?group_id=167

Thanks for the effort and the dedication. Much appreciated!

M.

7

Grmph, just saw the install directory issue in the bug database. Sorry for the noise. :-/

···

And I'm having troubles selecting the installation directory. The 'browse'-option allows me to create new folders, but does not allow to select this newly created folder (the 'Ok'-button stays disabled ). I have to type the folder into the field to have the installer accept it. (Yikes, typing!)

8

Henrik Horneber wrote:

Hi!

First of all, thanks for the effort, it's really appreciated! :slight_smile:

Thanks!

Still, I'd like to see some features and have some issues:

Being the lazy guy that I am, I like to create new files by using the
'new' command in explorers context menu. So, in order to create a new
ruby programm, I right-click in the folder I'd like to have the new file
in, choose new, choose new ruby programm, and explorer generates an
empty file 'new ruby program.rb' (or something alike). Any chance to
have an option for this in the installer?
(you'd need to create a new key 'ShellNew' under 'HKEY_CLASSES_ROOT\.rb'
and add an emtpy REG_SZ (String Value) named NullFile. Of course I could
always do it by hand, but as I said, I'm lazy :slight_smile: )

http://www.mvps.org/sramesh2k/shellnewadd.htm has a pretty good
explanation how to do it by hand

And I'm having troubles selecting the installation directory. The
'browse'-option allows me to create new folders, but does not allow to
select this newly created folder (the 'Ok'-button stays disabled ). I
have to type the folder into the field to have the installer accept it.
(Yikes, typing!)

I'm using Win 2k :slight_smile:

Sorry if this did come up before, I wasn't able to find anything on the
list or in the installer-wiki.

These are god ideas. The best way to get this on the to-do list is submit a
feature request:

  http://rubyforge.org/tracker/?atid=718&group_id=167&func=browse

I can do this later, if you don't get to it.

Curt

9

James Britt wrote:

When I downloaded the .exe using Firebird 0.6, the browser seems to think the file type is.gz, though the file name ends in .exe. (Then Firebird takes it upon itself to append this extension to the file name. Dopey.)

It worked fine with Firebird 0.9.3. Time to update? :slight_smile:

M.

10

James Britt wrote:

Curt Hibbs wrote:

> This release candidate of the One-Click Installer for Windows
> adds the FreeRIDE Ruby IDE (which has full source code
> navigation and a graphical debugger), and updates ruby-odbc
> to version 0.994.
>

I just installed RC8, selected the installation of FreeRIDE, but
declined the installation of Scite. When I try to run FreeRIDE, I get
an error message that iconv.dll cannot be found.

After I acknowledge the message, FreeRIDE loads anyway. I don't know,
though, that it does all it is suppose to.

That's pretty strange. I'll try to duplicate it and see if I can figure out
what's going on.

Curt

11

Phil Tomson wrote:

In article <EAENKKNOJPMNCDMLDOMLIEHDFIAA.curt@hibbs.com>,
>This release candidate of the One-Click Installer for Windows
>adds the FreeRIDE Ruby IDE (which has full source code
>navigation and a graphical debugger), and updates ruby-odbc
>to version 0.994.
>
>As soon as Matz releases Ruby 1.8.2 final, then we will release
>the final 1.8.2 version of the One-Click Installer
>
>Curt
>
>You can download this release candidate from:
>http://rubyforge.org/frs/?group_id=167
>
>

I just installed the RC8 release. Looks good, except that the tk
examples
in the samples dir don't seem to work. require 'tk' seems to fail (but I
can see the tcltklib.so). Fox examples worked, though.

Thanks. I've been making changes to the TCL/TK setup based on the advice of
others, but for me I'm shooting in the dark because I personally know
nothing about it (maybe its time to learn :-).

Did this work for you with RC7? The only thing I changed was to compile the
TCL/TK support with the --enable-tcltk_stubs option. If RC7 worked fine then
I'll probably just remove this option because I've already spent more time
on this than I could really afford.

Thanks again, and let me know if RC7 worked for you.

Curt

···

Curt Hibbs <curt@hibbs.com> wrote:

12

Hello,

There was a feature that I used to want in Perl, that was somewhat difficult
to do. I wanted to be able to drop text files onto a ruby script in windows
and have the ruby script automatically executed either with the text files
as standard input or as command line arugments. This feature is difficult
to add since you need to know some visual c++ and windows programming. I am
just wondering if there are any windows programmers on this list who might
have some ideas about this.

Trevor

···

-----Original Message-----
From: Henrik Horneber [mailto:ryco@gmx.net]
Sent: Tuesday, August 17, 2004 5:53 PM
To: ruby-talk ML
Subject: Re: [ANN] One-Click Ruby Installer 1.8.2-14 RC8 for Windows

Hi!

First of all, thanks for the effort, it's really appreciated! :slight_smile:

Still, I'd like to see some features and have some issues:

Being the lazy guy that I am, I like to create new files by using the
'new' command in explorers context menu. So, in order to create a new
ruby programm, I right-click in the folder I'd like to have the new file
in, choose new, choose new ruby programm, and explorer generates an
empty file 'new ruby program.rb' (or something alike). Any chance to
have an option for this in the installer?
(you'd need to create a new key 'ShellNew' under 'HKEY_CLASSES_ROOT\.rb'
and add an emtpy REG_SZ (String Value) named NullFile. Of course I could
always do it by hand, but as I said, I'm lazy :slight_smile: )

http://www.mvps.org/sramesh2k/shellnewadd.htm has a pretty good
explanation how to do it by hand

And I'm having troubles selecting the installation directory. The
'browse'-option allows me to create new folders, but does not allow to
select this newly created folder (the 'Ok'-button stays disabled ). I
have to type the folder into the field to have the installer accept it.
(Yikes, typing!)

I'm using Win 2k :slight_smile:

Sorry if this did come up before, I wasn't able to find anything on the
list or in the installer-wiki.

Henrik

13

Henrik Horneber wrote:

Grmph, just saw the install directory issue in the bug database. Sorry
for the noise. :-/

I tried to fix that one today, but it looks like its a bug in the NSIS
installer (i.e., its not something I caused). I'm still looking for a
solution short of debugging their code.

Curt

···

>
> And I'm having troubles selecting the installation directory. The
> 'browse'-option allows me to create new folders, but does not allow to
> select this newly created folder (the 'Ok'-button stays disabled ). I
> have to type the folder into the field to have the installer accept it.
> (Yikes, typing!)
>

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.717 / Virus Database: 473 - Release Date: 7/8/2004

14

Michael Vondung wrote:

James Britt wrote:

When I downloaded the .exe using Firebird 0.6, the browser seems to think the file type is.gz, though the file name ends in .exe. (Then Firebird takes it upon itself to append this extension to the file name. Dopey.)

It worked fine with Firebird 0.9.3. Time to update? :slight_smile:

Might be. I did a download of the one-click, using wget, and it gives these headers:

HTTP request sent, awaiting response...
  1 HTTP/1.1 200 OK
  2 Date: Wed, 18 Aug 2004 00:58:34 GMT
  3 Server: Apache/1.3.31 (Unix) PHP/4.2.3
  4 X-Powered-By: PHP/4.2.3
  5 Content-disposition: filename=ruby182-14_RC8.exe
  6 Content-length: 11586665
  7 Keep-Alive: timeout=15, max=100
  8 Connection: Keep-Alive
  9 Content-Type: application/binary

I think I've prolonged upgrading firefox because it doesn't know how to carry over my extensions and settings. Might look into that again.

Anyway, getting offtopic.

James

15

Hi,

At Wed, 18 Aug 2004 11:04:18 +0900,
Curt Hibbs wrote in [ruby-talk:109613]:

Thanks. I've been making changes to the TCL/TK setup based on the advice of
others, but for me I'm shooting in the dark because I personally know
nothing about it (maybe its time to learn :-).

Did this work for you with RC7? The only thing I changed was to compile the
TCL/TK support with the --enable-tcltk_stubs option. If RC7 worked fine then
I'll probably just remove this option because I've already spent more time
on this than I could really afford.

Sorry, it's my fault.

At Fri, 13 Aug 2004 14:07:36 -0500,
Curt Hibbs wrote:

- leave the tcl*.so and tk*.so files in c:\ruby\lib

This is upside-down. Leave tcltklib.so and tkutils.so under
lib/ruby/1.8/i386-mswin, but those underneath lib aren't
needed.

···

--
Nobu Nakada

16

In article <EAENKKNOJPMNCDMLDOMLKEIBFIAA.curt@hibbs.com>,

···

Curt Hibbs <curt@hibbs.com> wrote:

Phil Tomson wrote:

In article <EAENKKNOJPMNCDMLDOMLIEHDFIAA.curt@hibbs.com>,
Curt Hibbs <curt@hibbs.com> wrote:
>This release candidate of the One-Click Installer for Windows
>adds the FreeRIDE Ruby IDE (which has full source code
>navigation and a graphical debugger), and updates ruby-odbc
>to version 0.994.
>
>As soon as Matz releases Ruby 1.8.2 final, then we will release
>the final 1.8.2 version of the One-Click Installer
>
>Curt
>
>You can download this release candidate from:
>http://rubyforge.org/frs/?group_id=167
>
>

I just installed the RC8 release. Looks good, except that the tk
examples
in the samples dir don't seem to work. require 'tk' seems to fail (but I
can see the tcltklib.so). Fox examples worked, though.

Thanks. I've been making changes to the TCL/TK setup based on the advice of
others, but for me I'm shooting in the dark because I personally know
nothing about it (maybe its time to learn :-).

Did this work for you with RC7? The only thing I changed was to compile the
TCL/TK support with the --enable-tcltk_stubs option. If RC7 worked fine then
I'll probably just remove this option because I've already spent more time
on this than I could really afford.

Thanks again, and let me know if RC7 worked for you.

I didn't try RC7.

Phil

17

Trevor,

I've done exactly this using Exerb -- once you've built an EXE of your
script, you can just drag-and-drop files onto it, and your script
receives the full file path as its first argument.

···

--
Lennon
rcoder.net

18

Is there a way to determine what method you are in?

class myApp
    def mydef
       error = true;
       raise "#{self.class} : #{self.calling_method} error
    end
end

Something like the #{self.calling_method} above perhaps?

Thanks,

Zach

19

That makes more send to me, too. Since the current release seemed to fail
with a simple require 'tk', I can easily verify that this changes fixes
that.

Thanks,
Curt

···

nobu.nokada@softhome.net wrote:

Hi,

At Wed, 18 Aug 2004 11:04:18 +0900,
Curt Hibbs wrote in [ruby-talk:109613]:
> Thanks. I've been making changes to the TCL/TK setup based on
the advice of
> others, but for me I'm shooting in the dark because I personally know
> nothing about it (maybe its time to learn :-).
>
> Did this work for you with RC7? The only thing I changed was to
compile the
> TCL/TK support with the --enable-tcltk_stubs option. If RC7
worked fine then
> I'll probably just remove this option because I've already
spent more time
> on this than I could really afford.

Sorry, it's my fault.

At Fri, 13 Aug 2004 14:07:36 -0500,
Curt Hibbs wrote:
> - leave the tcl*.so and tk*.so files in c:\ruby\lib

This is upside-down. Leave tcltklib.so and tkutils.so under
lib/ruby/1.8/i386-mswin, but those underneath lib aren't
needed.

20

Hello Lennon,

Trevor,

I've done exactly this using Exerb -- once you've built an EXE of your
script, you can just drag-and-drop files onto it, and your script
receives the full file path as its first argument.

This is different from Trevors question if i understand it correctly.
You use one indirection, trevor want's a two level step:

A ruby script that gets started by a ruby interpreter and that script
gets the dropped file path. I've seen a patch for MacOS X that does
this but not for windows.

···

--
Best regards, emailto: scholz at scriptolutions dot com
Lothar Scholz http://www.ruby-ide.com
CTO Scriptolutions Ruby, PHP, Python IDE 's